Pause Button; Abort Button - Stratasys F123 Series Manual

Working with the Build Page

Pause Button

The Pause button allows you to pause an active build. The Pause button can appear in the
following states:
Button State

Abort Button

The Abort button allows you to abort an active build. The Abort button can appear in the
following states:
Button State
Table 3: Print Job Controls - Pause Button States
• Printer is actively building. Selecting the Pause button in this state will
pause the build.
• When the printer is paused,
Display.
• Pause button is disabled and not selectable.
• Printer is preparing for a build, there is no job currently building on the
printer.
• Printer is paused. The Pause button toggles to display the Play button.
• Selecting the Play button will resume the build.
• If the build was automatically paused as the result of an error, a notification
will be indicated on the screen. Touching the notification text displayed will
provide additional details pertaining to the current build state. See
Warnings" (page 125)
information.
Table 4: Print Job Controls - Abort Button States
• Printer is actively building.
• Pressing the Abort button in this state will initiate an abort of the build and
will display a prompt asking you to acknowledge the abort.
• If accepted, the build will be aborted.
• If canceled, the build will be unaffected (i.e. revert to its previous
state).
• Abort button is disabled and not selectable.
• There is no job currently building on the printer.
© Copyright 2021 Stratasys. All rights reserved.
Description
" "
PAUSED is displayed within the Build Status
and "Build Pause Warnings" (page 221)
Description
Print Job Controls
"Build
for more
Page 52