Checking Products On Delivery - YASKAWA MECHATROLINK Sigma 2 Series User Manual

1 Checking Products and Part Names
1.1

Checking Products on Delivery

The following procedure is used to check products upon delivery. Check the following items
when products are delivered.
Check Items
Are the delivered products the ones
that were ordered?
Is there any damage?
Can the NS115 be installed on the
SERVOPACK used?
If any of the above items are faulty or incorrect, contact your Yaskawa sales representative or
the dealer from whom you purchased the products.
External Appearance and Nameplate Examples
NS115
S
W
1
A
R
S
W
2
C
N
6
A
C
N
6
B
C
N
4
Fig. 1.1 External Appearance of
the NS115
Check the model numbers marked on the nameplates
of the NS115. (Refer to the descriptions of model
numbers on the following page.)
Check the overall appearance, and check for damage
or scratches that may have occurred during shipping.
Check the model number given on the SERVOPACK
nameplate and the version seal on the front panel. The
model number must contain "SGDH" and "E" as
shown below to support the NS115.
Model number (MODEL): SGDH-
The latter two numbers on the version seal are more
than 33.
Version seal: ∗∗∗33
Application module model number
Application module name
SERVOPACK
MECHATROLINK
MODEL JUSP-NS115
S/N V81003-69
YASKAWA ELECTRIC
MADE
Serial number
Fig. 1.2 Nameplate
1-2
Comments
E-
I/F UNIT
VER. 000000
IN JAPAN
Version