Status:questionable:enable; Status:questionable[:Event] - HP E1418A User Manual

STATus:QUEStionable:ENABle?

Parameters

STATus:QUEStionable[:EVENt]?

Parameters
Comments
Chapter 3
STATus:QUEStionable:ENABle?
Enable Register.
Returns: 16-bit signed integer (int16).
STATus:QUEStionable[:EVENt]?
Event Register. Reading the register clears all bits in the register.
Returns: 16-bit signed integer (int16).
•
Bit 8 of this register (decimal 256) is set when either:
A channel is set to an output mode that has not been calibrated, or
–
A channel fails the
– CALibration:TEST?
•
Bit 9 of this register (decimal 512) is set when a trigger-ignored event occurs.
•
*RST Condition: no effect.
• *CLS
clears the contents of the Questionable Status Register.
• STATus:PRESet
does not affect the contents of the Questionable Status Register,
but does disable reporting the Summary bit to the Status Byte Register.
returns the mask set for the Questionable Status
returns the value of the Questionable Status
query.
HP E1418A SCPI Command Reference
STATus
98