6. LW2 Programmer's Reference
6
L W2 Programmer' s Reference
The device can be controlled through a reduced command set of LW2 protocol commands to ensure the compatibility
with other Lightware products. The supported LW2 commands are described in this chapter.
ç LW2 Protocol Description
ç Instructions for the Terminal Application Usage
ç General LW2 Commands
ç AV Port Settings
ç Network Configuration
ç RS-232 Settings
ç GPIO Port Configuration
ç LW2 Commands – Quick Summary
Applied firmware packages: (UMX-TPS): v1.5.0b4 | (WP-UMX-TPS): v1.4.0b8 | (FP-UMX-TPS): v1.4.0b8 | LDC software: v2.5.6b2
UMX-TPS-TX100 series – User's Manual
86