Siemens ERTEC 200P-2 Manual page 3

Preface
Target Audience of this Manual
This manual is intended for hardware developers who want to use the ERTEC 200P for new products. Experience
working with processors and designing embedded systems and knowledge of Ethernet are required for this. It described
all ERTEC function groups in details and provides information that you must take into account when configuring your own
PROFINET IO device hardware.
The manual serves as a reference for software developers. The address areas and register contents are described in
detail for all function groups.
Structure of this Manual
o Section 1 Introduction
o Section 2 Description of functions
o Section 3 IO Interface
o Section 4 Layout and Design Hints
o Section 5 Package
o Section 6 Quality
o Section 7 Miscellaneous
Scope of the Manual
This manual applies to the following product:
ERTEC 200P-2
Copyright © Siemens AG 2016. All rights reserved 3 ERTEC 200P-2 Manual
Technical data subject to change Version 1.0