Siemens ERTEC 200P-2 Manual page 4

This manual will be updated as required. You can find the current version of the manual on
the Internet at
http://www.siemens.com/comdec
Guide
To help you quickly find the information you need, this manual contains the following aids:
A complete table of contents as well as a list of all figures and tables in the manual are provided at the beginning of
o
the manual.
A glossary containing definitions of important terms used in the manual is located following the appendices.
o
References to other documents are indicated by the document reference number enclosed in slashes (/No./). The
o
complete title of the document can be obtained from the list of references at the end of the manual.
Additional Support
If you have questions regarding use of the described block that are not addressed in the documentation, please contact
your Siemens representative.
Please send your written questions, comments, and suggestions regarding the manual to
the hotline via the e-mail address indicated above.
In addition, you can receive general information, current product information, FAQs, and
downloads pertaining to your application on the Internet at:
http://www.siemens.com/comdec
UU
Technical Contacts for Germany / Worldwide
Siemens AG
ComDeC
Street address:
Breslauer Str. 5
90766 Fürth
Technical Contacts for USA
PROFI Interface Center:
One Internet Plaza
PO Box 4991
Johnson City, TN 37602-
4991
Technical Contacts for China
PIC China: Mr. Xu Bin
7,Wangjing Zhonghuan Nanku E-mail: Profinet.cn@siemens.com
100102 BEIJING
Copyright © Siemens AG 2016. All rights reserved
Technical data subject to change
.
UU
Phone: 0911/750-2080
Fax: 0911/750-2100
E-mail: ComDeC@siemens.com
Fax: +1(423)- 262- 2103
Phone: +1(423)- 262- 2576
E-mail:
pic.industry@siemens.com
4 ERTEC 200P-2 Manual
Version 1.0