Siemens ERTEC 200P-2 Manual page 2

Edition (10/2016)
DISCLAIMER
WE HAVE CHECKED THE CONTENTS OF THIS MANUAL FOR AGREEMENT WITH THE
HARDWARE AND SOFTWARE DESCRIBED. SINCE DEVIATIONS CANNOT BE PRECLUDED
ENTIRELY, WE CANNOT GUARANTEE FULL AGREEMENT. HOWEVER, THE DATA IN THIS
MANUAL ARE REVIEWED REGULARLY. NECESSARY CORRECTIONS ARE INCLUDED IN
SUBSEQUENT EDITIONS. SUGGESTIONS FOR IMPROVEMENT ARE WELCOMED.
THIS MANUAL CONTAINS HYPERLINKS TO THE WEB SITES AS WELL AS TO
ELECTRONIC DOCUMENTS OF THIRD PARTY COMPANIES. SIEMENS CANNOT BE HELD
RESPONSIBLE FOR THE CONTENTS OF THESE WEB SITES AND ELECTRONIC
DOCUMENTS, NOR DOES SIEMENS ADOPT THESE WEB SITES AND ELECTRONIC
DOCUMENTS AND THEIR CONTENTS AS THEIR OWN. YOU THEREFORE USE THESE
LINKS AT YOUR OWN RISK. SINCE SIEMENS IS NOT RESPONSIBLE FOR LINKED
CONTENTS AND INFORMATION ON THE WEB SITES AND ELECTRONIC DOCUMENTS OF
THIRD PARTIES, THIS INFORMATION IS NOT CHECKED BY SIEMENS.
COPYRIGHT
© SIEMENS AG 2016. ALL RIGHTS RESERVED
THE REPRODUCTION, TRANSMISSION OR USE OF THIS DOCUMENT OR ITS CONTENTS
IS NOT PERMITTED WITHOUT EXPRESS WRITTEN AUTHORITY. OFFENDERS WILL BE
LIABLE FOR DAMAGES. ALL RIGHTS, INCLUDING RIGHTS CREATED BY PATENT GRANT
OR REGISTRATION OF A UTILITY MODEL OR DESIGN, ARE RESERVED.
ALL PRODUCT AND SYSTEM NAMES ARE REGISTERED TRADEMARKS OF THEIR
RESPECTIVE OWNER AND MUST BE TREATED AS SUCH.
TECHNICAL DATA SUBJECT TO CHANGE.
Copyright © Siemens AG 2016. All rights reserved 2 ERTEC 200P-2 Manual
Technical data subject to change Version 1.0