Siemens ERTEC 200P-2 Manual page 394

Register:
Bits:
Description:
Bit Identifier
0 I_CACHE_PAR_EN
1 D_CACHE_PAR_EN
2 EDC_DISABLE_ARM926
3 reserved
Register:
Bits:
Description:
Bit Identifier
0 PN_IP_ACCESS_ERR
1 PER_IF_ACCESS_ERR
2 I_FILTER_ACCESS_ERR
3 HOST_IF_ACCESS_ERR
Copyright © Siemens AG 2016. All rights reserved
Technical data subject to change
EDC_PARITY_EN
31dt0 Reset value: 0h
EDC and Parity Enable (2:0)
Reset
xh
xh
xh
xh
MODUL_ACCESS_ERR
31dt0 Reset value: 0h
Module Access Error register (5:0) - '0'h must be written to
the register to clear
Reset
xh
xh
xh
xh
394
Address: 64h
Attribu-
tes:
Attr. Function / Description
0: Parity logic for ARM926 I-cache / I-
tag is disabled (default)
r w
1: Parity logic for ARM926 I-cache / I-
tag is enabled
0: Parity logic for ARM926 D-cache /
D-tag is disabled (default)
r w
1: Parity logic for ARM926 D-cache /
D-tag is enabled
0: The EDC logic in ARM926 I/D-TCM
is enabled (default)
r w
1: The EDC logic in ARM926 I/D-TCM
is disabled
0: reserved (default)
r w
1: reserved
Address: 68h
Attribu-
tes:
Attr. Function / Description
0: No access error has occurred in
the PN-IP
r
w
h 1: An access error has occurred in the
PN-IP
0: No access error has occurred in
the PER-IF
r
w
h 1: An access error has occurred in the
PER-IF
0: No access error has occurred in
the I-filter
r
w
h 1: An access error has occurred in the
I-filter
0: No access error has occurred in
r
the HOST IF
w
h
1: An access error has occurred in the
r w
rh w
ERTEC 200P-2 Manual
Version 1.0