Table of Contents
Advertisement
Register:
FIQ_SEL_4
Bits:
6dt0
Description:
Register:
FIQ_SEL_5
Bits:
6dt0
Description:
Register:
FIQ_SEL_6
Bits:
6dt0
Description:
Register:
FIQ_SEL_7
Bits:
6dt0
Description:
Copyright © Siemens AG 2016. All rights reserved
Technical data subject to change
about this issue.
Reset value:
Selects one of the IRQs as input to FIQ processing.
Important: The FIQ_SEL register have to be configured with different val-
ues (except 0) for each select register. The ICU does not take care at all
about this issue.
Reset value:
Selects one of the IRQs as input to FIQ processing.
Important: The FIQ_SEL register have to be configured with different val-
ues (except 0) for each select register. The ICU does not take care at all
about this issue.
Reset value:
Selects one of the IRQs as input to FIQ processing.
Important: The FIQ_SEL register have to be configured with different val-
ues (except 0) for each select register. The ICU does not take care at all
about this issue.
Reset value:
Selects one of the IRQs as input to FIQ processing.
Important: The FIQ_SEL register have to be configured with different val-
ues (except 0) for each select register. The ICU does not take care at all
about this issue.
00h
00h
00h
00h
102
Address:
48010h
Attributes:
r
Address:
48014h
Attributes:
r
Address:
48018h
Attributes:
r
Address:
4801Ch
Attributes:
r
ERTEC 200P-2 Manual
Version 1.0
w
w
w
w
- Quick Links:
- Overview of the Ertec 200P
Hide quick links:
Advertisement
Table of Contents
