Wago To-Pass Web; Setting Parameters - WAGO 761-113 Manual

WAGO-TO-PASS® 761
761-113 Telecontrol Module Compact, 2 AI, Web
10 WAGO TO-PASS
10.1

Setting Parameters

Select the TO-PASS
Select the Addresses option in order to enter the parameters for transmission to a
Web portal.
You can initially use our WAGO TO-PASS
To do this, enter "www.to-pass.com" as the Host address and the value "80" as
the Host port. Enter "wago/saveTO-PASS.php" as the script name under Script
(Values) and/or under Script (Logger).
Enter the information for your SIM card provider for APN access, user name and
password (see also Section "Parameter setting" > "Addresses").
Under Special Functions, select Repetition Time and set the WEB Interval for
the cyclic transmission to the Web portal, e.g., 5 minutes.
Select the messages that are also to be sent to the Web portal, and click the
[Internet] button.
Communication as SMS or to the Web portal can be tested under the menu item
Processing > Test SMS/GPRS. Click the [Internet] button and enter any text,
such as "TEST" in the field Unstructured Text. Then click [Send]. The reply
"Web Refresh = 0" should follow after approx. 20 seconds.
Now go to the Web address
"test" as the user name and "test" as the password.
Now select your TO-PASS
the [Display] button.
Manual
Version 2.0.0
®
Web
®
telecontrol module to be configured from the project tree.
www.to-pass.com
®
telecontrol module from the following list and click
WAGO TO-PASS® Web
®
portal for test purposes.
and click [MyTO-PASS]. Enter
89