Starting Up The Fieldbus Coupler - WAGO 767-1501 Quick Start Manual

30 WAGOframe
6.2

Starting Up the Fieldbus Coupler

Now switch on the power for the fieldbus coupler and link its service port to a free
USB slot on your PC using the USB communication cable 756-4101/0042-0030.
Communication between WAGOframe and the fieldbus coupler is carried out via
the communication DTM "WAGO Service Interface". The COM port that is used
depends on the USB slot and must be parameterized accordingly in the WAGO
Service Interface.
If the fieldbus coupler is linked to a different USB slot at a later time, this will
also result in a change to the COM ports used by "I/O-Service". In this case the
setting for the serial interface must be adapted accordingly in the communication
DTM.
Note
WAGO-SPEEDWAY 767
Fieldbus Coupler for CANopen