Additional Status When General Status Is 01 Hex - Omron K6PM-TH User Manual

Appendices
A-4-2

Additional Status When General Status Is 01 hex

General Additional
Status Status
(hex) (hex)
01 0100
01 0103
01 0106
01 0107
01 0108
01 0109
01 0110
01 0111
01 0113
01 0114
01 0115
01 0116
01 0117
01 0118
01 0119
01 011A
01 011B
01 0203
01 0204
01 0205
01 0206
01 0207
01 0301
01 0302
01 0303
01 0304
01 0311
01 0312
01 0315
01 0316
01 0317
01 0318
01 0319
01 031A
01 031B
01 031C
01 031D
01 031E
01 031F
01 0320- 07FF
A - 38
Connection in Use or Duplicate Forward Open.
Transport Class and Trigger combination not supported.
Ownership Conflict.
Connection not found at target application.
Invalid Connection Type. Indicates a problem with either the Connection Type or Prior-
ity of the Connection.
Invalid Connection Size.
Device not configured.
RPI not supported. May also indicate problem with connection time-out multiplier, or
production inhibit time.
Connection Manager cannot support any more connections.
Either the Vendor Id or the Product Code in the key segment did not match the device.
Product Type in the key segment did not match the device.
Major or Minor Revision information in the key segment did not match the device.
Invalid Connection Point.
Invalid Configuration Format.
Connection request fails since there is no controlling connection currently open.
Target Application cannot support any more connections.
RPI is smaller than the Production Inhibit Time.
Connection cannot be closed since the connection has timed out.
Unconnected_Send timed out waiting for a response.
Parameter Error in Unconnected_Send Service.
Message too large for Unconnected message service.
Unconnected acknowledge without reply.
No buffer memory available.
Network Bandwidth not available for data.
No Tag filters available.
Not Configured to send real-time data.
Port specified in Port Segment Not Available.
Link Address specified in Port Segment Not Available.
Invalid Segment Type or Segment Value in Path.
Path and Connection not equal in close.
Either the segment is not present or the encoded value in the network segment is
invalid. Either the segment is not present or the encoded value in the network segment
is invalid.
Link Address to Self Invalid.
Resources on Secondary Unavailable.
Connection already established.
Direct connection already established.
Miscellaneous.
Redundant connection mismatch.
There are no more available reception resources in the sending module.
No connection resources exist for target path.
unused.
K6PM-TH Thermal Condition Monitoring Device User's Manual (H231)
Explanation