Motor (Device Group) Rename; Save Overwriting Project - Omron K6CM User Manual

8
Change the IP address from the factory default value. Change the subnet mask and default
gateway as necessary.
It is recommended that you write the changed IP address on the IP address label.
9
Click the [OK] Button.
The IP address setting on the project is changed, and the IP address of the actual device is
automatically changed from the factory default value at the same time.
6-2-4

Motor (Device Group) Rename

To change the name of the motor (device group) on the project, execute the following operation.
1
In the Device setting screen, left click on the position of the motor name and change it.
6-2-5

Save Overwriting Project

To overwrite and save the project, do the following operations.
1
Click the
The following dialog box will be displayed.
Note To save as a name, click
2
Click the [OK] Button.
At this time, the log file is automatically saved with the project file.
K6CM Motor Condition Monitoring Device User's Manual (N219)
IP address label
[Save Project] Button on the menu tool button.
[Save the project as the specified name] of the menu tool button.
6 How to Use the Software Tool
6
6 - 27