Siemens Sinumerik 840D Operating Turning page 650

Hide thumbs Also See for Sinumerik 840D:

Complex programming example

To simulate the machining, switch back to the hori-

zontal softkey bar 1.

For this press the "Extend"-key on the operator

The horizontal softkey bar 1 opens.

Start the simulation, by pressing the HSK 1.7

"Simulation".

The control calculates the simulation and starts the

simulation in an animation window, showing the ma-

chining in a side view on the blank.

If you want to watch the simulation with a view on

the front side of the blank, press the VSK 1.4 "Face

840D/828D SINUMERIK Operate

Sinumerik 828d