Siemens Sinumerik 840D Operating Turning page 158

Hide thumbs Also See for Sinumerik 840D:

CNC-full keyboard

A full CNC-keyboard for operation and programming can be integrated on

an operating panel of the machine, depending on the type of Operator

The keys that are described here can also be located directly on the opera-

tor panel. The layout of the operating panel is described in the documenta-

tion of the machine manufacturer.

Below follows a description of the basic keys of the CNC-full keyboard.

CNC-full keyboard "KB 483":

Alpha-block:

The alpha-block features the letters A, ..., Z, the

space key and the special character for the input of

Hotkey-block:

The hotkey-block serves the direct selection of op-

eration sectors.

Cursor-block:

The cursor-block is used for navigation around the

screen display.

Number-Block:

The Number-Block features the numbers 0 ... 9, the

decimal point and special characters for the input of

numerical characters and operators.

Keys in the alpha-block

Clears a value in the input field.

In the edit mode, the character in front of the cursor

will be cleared.

Indent the cursor by several characters.

If the SHIFT-key is held pressed, the upper charac-

ter on keys with double usage will be entered.

With the following key combinations navigation in the

work plan and the G-Code-Editor is carried out:

Hotkey-Block

Cursor-Block

CTRL + NEXT WINDOW: Jump to the beginning.

CTRL + END: Jump to the end.

Number-Block

840D/828D SINUMERIK Operate

Sinumerik 828d