Siemens Sinumerik 840D Operating Turning page 558

Section 6
Notes
B601
B601
Simulation
6.1 Selecting the function "Simulation"
The function "Simulation" can be selected from the operating mode "JOG",
"MDA" and "AUTO" as follows:
With a program loaded, press the HSK 1.7
"Simulation" to start a simulation run.
The following screen opens, with a side view on the
blank by default.
By pressing the VSK 1.4 "Face view", run the simu-
lation with a face view on the blank.
The following functions are available in the vertical softkey bar.
Page 50 840D/828D SINUMERIK Operate