Siemens Sinumerik 840D Operating Turning page 411

Hide thumbs Also See for Sinumerik 840D:

Simple programming example

Now, insert a drill tool into the program.

Press the VSK 1.1 "Select tool".

The tool list window opens.

Select the tool "DRILL_D8.5" by using the blue cur-

sor key on the keyboard.

Press the VSK 1.1 "To program".

The following program line is inserted into the pro-

N30 T="DRILL_D8.5"

Optionally you can program the tool by hand.

Programm the following G code commands:

N50 S1000 M3 F150

N60 G0 X0 Z1 Z2=250

Program the drilling-cycle "CYCLE82".

For this, press the HSK 1.2 "Drill." to open the tech-

nology "Drilling".

Press the VSK 2 "Drilling Reaming".

Press the VSK 3 "Drilling". The input mask for the

drilling cycle "CYCLE82" opens.

Insert the values into the parameter mask like dis-

played below:

The following program line will be inserted into the

N70 CYCLE82(100,0,1,,25,0.6,10,1,11)

Programm the following G code commands:

N80 G0 X200 Z200 G5

Program the program end:

840D/828D SINUMERIK Operate

Sinumerik 828d