Siemens Sinumerik 840D Operating Turning page 548

Section 5
Notes
B601
B601
Various
Parameters Description
Adds an additive mir-
Additive
roring
Axes:
Mirroring for the Z axis
Z (on/off)
Mirroring for the X axis
X (on/off)
Mirroring for the Y axis
Y (on/off)
5.5.7.3 Mirroring the axes
1. In the operating area "Program" and operaring mode
"JOG", "MDA" or "AUTO" press the HSK 1.6
"Various" and the VSK 5 "Transformations".
2. Press the VSK 5 "Mirroring".
3. Optionally change the graphic view on the blank by
pressing the VSK 2 "Graphic view".
4. Select whether the "Mirroring" is new or additive.
Switch on or off the axis that you want to have mir-
rored.
Press the VSK 8 "Accept" to confirm your inputs or
press the VSK 7 "Cancel" to abort.
A new program block "Mirroring" is inserted into the
program in the editor window (alike picture below).
Page 40
Help picture/animation
(continuation)
840D/828D SINUMERIK Operate