Siemens Sinumerik 840D Operating Turning page 386

Hide thumbs Also See for Sinumerik 840D:

With the editor you can create, supplement, or change part programs.

4.1 Selecting the function "Edit"

The program editor can be opened from the operating modes "JOG",

"MDA" or "AUTO"..

By pressing the "PROGRAM"-key on the keyboard

the editor window opens directly, with the last

opened program.

If no program was loaded before, the program man-

ager window opens instead, where you can create or

select an existing program.

Press the "MENU SELECT"-key on the operator

If the function "Edit" is not active, press the HSK 1

If the function "Edit" is not active, press the HSK 1

If no program had been opened for editing purpose,

then the Sinumerik Operate opens the Program

Manager window, offering a chance to the user for

choosing the desired program for editing.

For further details see module - B524 "Operating

area Program", and also module - B526 "Operating

area Program Manager".

The following softkeys are available for editing a program:

840D/828D SINUMERIK Operate

Sinumerik 828d