Siemens Sinumerik 840D Operating Turning page 503

Hide thumbs Also See for Sinumerik 840D:

Complex measurement example

Press the HSK 2.6 "Measurem. milling".

The operating range "Measurement milling" with ex-

tended measuring functions is opened.

Press the VSK 4 "Workpiece measure".

The vertical softkey-strip with functions for the meas-

uring of work pieces is opened.

Pressing the selection key "Plane" opens the input

window for the Cycle 978 "1 Pt. measure./

Enter the following values into the parameter win-

Acknowledge your entry by pressing the VSK 8

The following lines are added to the program:

_MVAR=100 _SETVAL=0.5 _PRNUM=1 _MA=3

_KNUM=1 _FA=10 _TSA=10 _VMS=0 _NMSP=1

Now programme the End-of-Program with the follow-

N200 X100 Z200

Finally simulate the measurement of the work piece.

Si840D/828D SINUMERIK Operate

Sinumerik 828d