Siemens Sinumerik 840D Operating Turning page 528

Section 5
Notes
B601
B601
Various
5.3.3 Changing the "Graphic view" on the blank
The graphical view on the blank can be changed in the operating area
"Program" within the functions "Edit", "Drilling", "Turning", "Contour turning"
"Milling", "Various" and "Straight Circle".
Note:
The help pictures with the corresponding animation are only shown when
the VSK 2 "Graphic view" is deselected.
The view on the blank can be changed as follows:
1. In the operating area "Program" within the operating
mode "JOG, "MDA, or "AUTO" press the HSK 1.6
"Various".
2. Activate or deactivate the VSK 2 "Graphic view" to
switch the view in the parameter window between:
Page 20
a 3-D view or help picture with animation or
a programming graphic.
840D/828D SINUMERIK Operate