Siemens Sinumerik 840D Operating Turning page 564

Section 7
Notes
B601
B601
NC Execute
The function "NC Execute" lets you load the active program from the editor
to the operating area "Machine" in the operating mode "AUTO".
7.1 Selecting the function "NC Execute"
By pressing the HSK 1.8 "NC Execute" the control,
switches to the operating area "Machine" under the
operating mode "AUTO".
The program modified in the editor is now ready for
machining (see picture below).
Note:
While running this softkey is deactivated.
Page 56 840D/828D SINUMERIK Operate