Siemens Sinumerik 840D Operating Turning page 426

Hide thumbs Also See for Sinumerik 840D:

Simple programming example

Insert the following G code commands into the pro-

gram and program the program end:

N190 G0 X200 Z200

At the end, simulate the machining.

Press the HSK 1.7 "Simulation" to start the simula-

tion of the program.

The simulation starts in a "Side view" on the blank by

To see the simulation of the machining from the front

of the blank, press the VSK 1.4 "Face view".

840D/828D SINUMERIK Operate

Sinumerik 828d