Siemens Sinumerik 840D Operating Turning page 294

Hide thumbs Also See for Sinumerik 840D:

All parameters and functions that are required during operation are con-

tained in the tool wear list.

Tools that are in use for long periods are subject to wear. You can meas-

ure this wear and enter it in the tool wear list. The Sinumerik Operate then

takes this information into account when calculating the tool length or ra-

dius compensation. This ensures a consistent level of accuracy during

workpiece machining.

You can automatically monitor the tools' working times via the workpiece

count, tool life or wear.

In addition, you can disable tools when you no longer wish to use them.

Selecting the function "Tool wear"

By pressing the HSK 2 "Tool wear" the "Tool wear"

window opens.

Vertical softkey bar

Display area

By pressing the VSK 1 "Sort" and "Filter" you can

sort and filter the tools in the tool list according to

different parameters.( See section 3.12 and 3.13)

By pressing the VSK 6 "Reactivate" locked tools

can be made operational again.

(See section 4.7)

840D/828D SINUMERIK Operate

Sinumerik 828d