Siemens Sinumerik 840D Operating Turning page 475

Hide thumbs Also See for Sinumerik 840D:

Complex programming example

Press the VSK 1.1 "To program".

The following program line is inserted into the pro-

N390 T="THREADING_TOOL_2"

Insert the following G code commands into the pro-

N410 G97 S400 M4

Insert a "Thread" cycle (CYCLE99) into the program.

Press the VSK 4 "Thread".

The work area for the thread cycle opens.

Press the VSK 3 "Thread long." to open the parame-

ter mask for the "Thread longitudinal" cycle.

Insert the values into the parameter mask like dis-

played below:

Confirm your inputs by pressing the VSK 8 "Accept".

The following G code line is inserted into the pro-

N420 CYCLE99(0,42,-24,,4,0,1.227,0.1,30,0,3,0,2,

1110101,4,2,0.5,0.5,0,0,1,0,0.708409,1,,,,2,0)

840D/828D SINUMERIK Operate

Sinumerik 828d