Siemens Sinumerik 840D Operating Turning page 428

Hide thumbs Also See for Sinumerik 840D:

Complex programming example

The following program, with the call up of a rectangular pocket cycle is to

be programmed.

Create a new G code programGUIDE-program in ShopTurn, like described

in section 2.1 in this module.

Give the program a name, for example "DIN_MILLING_2.MPF".

Program the first G code line of the program:

N100 G55 G17 G90

Insert now a blank for the simulation.

Press the HSK 1.6 "Various" to open the work area

Press the VSK 1 "Blank" to open the parameter

mask for the blank.

Insert the values into the parameter mask like dis-

played below:

Confirm your inputs by pressing the VSK 8 "Accept".

The following line will be inserted into the program:

N110 WORKPIECE(,,"","CYLINDER",192,0,-100,-

Now, insert a cutter tool into the program.

Press the VSK 1.1 "Select tool".

The tool list window opens.

Select the tool "CUTTER_D8" by using the blue cur-

sor key on the keyboard.

840D/828D SINUMERIK Operate

Sinumerik 828d