Siemens Sinumerik 840D Operating Turning page 461

Hide thumbs Also See for Sinumerik 840D:

1 Brief description

Objective of the module:

Working through this module you become familiar with the technology "Turning" by programming two

G code programs with the programGUIDE in ShopTurn.

Description of the module:

This module explains the programming of a simple turning example (spigot) with the programGUIDE

in ShopTurn, as well as the programming of a more complex workpiece (threaded spigot) by means

of different turning cycles.

840D/828D SINUMERIK Operate

This document was produced for training purposes.

Siemens assumes no responsibility for its contents.

Sinumerik 828d