Siemens Sinumerik 840D Operating Turning page 519

Hide thumbs Also See for Sinumerik 840D:

With the editor you can create, supplement and change part programs.

4.1 Selecting the function "Edit"

The function "Editor" can be opened from the operating mode "JOG",

"MDA" and "AUTO".

By pressing the "PROGRAM"-key on the keyboard

the operating area "Program" opens, showing the

last program you have worked on.

Press the "MENU SELECT"-key on the operator

Press the yellow HSK 3 "Program" to switch to the

operating area "Program".

The operating area "Program" opens, showing the

last program you have worked on (alike picture be-

If no program was loaded after starting the control,

the program manager window opens first.

Here you can select a program or create a new one.

See module - B524 "Operating area Program" ,or

module - B526 "Operating area Program Manager".

The following softkeys, with their corresponding functions, are now avail-

able in the vertical softkey bar:

840D/828D SINUMERIK Operate

Sinumerik 828d