Siemens Sinumerik 840D Operating Turning page 522

Section 4
Notes
B601
B601
Edit
4.4 Renumbering
With the function "Renumbering" you can renumber manually the program
steps in the work plan window with an increment you can select here.
4.4.1 Selecting the function "Renumbering"
By pressing the VSK 2.3 "Renumbering" the input
mask for the renumbering settings opens.
4.4.2 Parameters for "Renumbering"
Parameters Meaning
First block number The first block number you want to start with.
The values shown here by default, can be adjusted
under the the function "Settings" in the input field
"First block number" (see section 4.5).
Increment The Increment between the program blocks.
The values shown here by default can be adjusted
under the function "Settings" in the input field
"Increment" (see section 4.5)
Page 14 840D/828D SINUMERIK Operate