Siemens Sinumerik 840D Operating Turning page 446

Hide thumbs Also See for Sinumerik 840D:

Complex programming example

The following program code is inserted into the pro-

N180 CYCLE952("ROUGHING",,

"REST_ROUGHING",2301311,0.3,0,0,1.9,0.1,0.1,0.

2,0.2,0.1,0,3,0,0,,,,,2,2,,,0,1,,0,12,1110110)

Program the following G code commands:

N190 G0 X200 Z200

Insert a tool into the program.

Press the VSK 1.1 "Select tool".

The tool list window opens.

Select the tool "BUTTON_TOOL_8" by using the

blue cursor key on the keyboard.

Press the VSK 1.1 "To program".

The following program line is inserted into the pro-

N200 T="BUTTON_TOOL_8"

Optionally you can program the tool by hand.

Program the following G code commands:

N220 S240 M4 F0.25

Insert a contour call "CYCLE62" into the program.

Press now the VSK 1 "Contour".

The vertical softkey bar for creating or calling up a

contour opens.

Press the VSK 2 "Contour call" to open the input

mask for the call up of a contour.

Enter the following contour name into the parameter

Confirm your input by pressing the VSK 8 "Accept".

The following line is inserted into the program:

N230 CYCLE62("SPIGOT_BLANK",1,,)

The contour "SPIGOT_BLANK" you called up here,

will be created in section 31.

840D/828D SINUMERIK Operate

Sinumerik 828d