Download Print this page

Siemens Sinumerik 840D Operating Turning page 602

Hide thumbs Also See for Sinumerik 840D:

Advertisement

Section 3
Notes
B625
B625
Complex programming example
6.
Insert the following values into the parameter mask:
Confirm your inputs by pressing the VSK 8 "Accept".
The following programm block is inserted into the
program:
7.
Insert another stock removal cycle into the program.
Press the VSK 1 "Stock removal".
The work area for the technology "Stock removal"
opens.
Press the VSK 4 "Stock removal 2", to open the pa-
rameter mask for the "Stock removal 2" cycle.
8.
Insert the following values into the parameter mask:
To insert a tool into the parameter mask, press the
VSK 1 "Select tool".
Mark the desired tool (here FINISHING_TOOL_35)
in the tool list with the orange selection cursor and
press the VSK 1 "To program".
Page 10
840D/828D SINUMERIK Operate

Advertisement

loading

This manual is also suitable for:

Sinumerik 828d