Siemens Sinumerik 840D Operating Turning page 496

Hide thumbs Also See for Sinumerik 840D:

Simple measurement example

2.2 Programming example: Measuring a pipe internally

The following program with the call-up of a simple measuring cycle is to be

programmed.:

Programme the first line of the program:

N100 G54 G17 G90

Now add a 'Blank' for the simulation.

For this press the HSK 1.6 "Various" to call up the

work range "Various".

Press the VSK 1 "Blank" to open the input mask for

the 'Blank' parameters.

Now enter the following parameters for the 'Blank':

Acknowledge the inputs with the VSK 8 "Accept".

The following line will be added.

N110 WORKPIECE(,,"","PIPE",448,0,-100,-

Now insert a measuring probe for the measuring mo-

tion into the program.

Press the VSK 1.1 "Select tool".

The tool list opens.

With the blue cursor-keys on the keyboard select the

tool "3D_PROBE_BLUM".

840D/828D SINUMERIK Operate

Sinumerik 828d