Siemens Sinumerik 840D Operating Turning page 515

Creating ShopTurn programs
3.1 Creating a new ShopTurn program
A new ShopTurn program can be created from the operating modes
"JOG", "MDA" and "AUTO" as follows:
Press the "Program Manager" key on the keyboard.
The window for creating and managing programs
opens directly.
See module B525 - „Operating area Program Man-
ager".
- OR -
Press the "MENU SELECT" key on the operator
panel (OP).
Press the yellow HSK 4 "Program Manager".
The window for creating and managing programs
opens.
- THEN -
Select a storage drive, by pressing the horizontal
softkey "NC", "Local drive" or "USB", where you want
to create the program.
Move the orange cursor with the blue cursor-keys to
the directory of your choice.
For the navigation process refer to the modules
B516 - "Operating elements" or B525 - "Operating
area Program Manager".
Press the VSK 2 "New".
The vertical softkey bar with functions for creating
new programs opens.
Press the VSK 3 "ShopTurn", to open the input mask
for creating a new sequential ShopTurn program
(like displayed below):
840D/828D SINUMERIK Operate
Section 3
Notes