Siemens Sinumerik 840D Operating Turning page 273

Tool list
Display area Description (continuation)
By pressing the HSK 4 "Magazine" the "Magazine"
window opens.
See section 5 "Magazine".
By pressing the HSK 5 Work offset" the "Work off-
set" window opens.
See section 7 "Work offset".
By pressing the HSK 6 "User variable" a list with all
"R variables" opens.
See section 8 "User variable".
By pressing the HSK 8 "Setting data" the "Working
area limitation" window opens.
See section 9 "Setting data".
3.1 Selecting the function "Tool list"
By pressing the HSK 1 "Tool list" the "Tool list" win-
dow opens.
(Note the screen below.)
In the tool list all parameters and functions that are required to create and
set up the tools are displayed. Each tool is uniquely identified by the loca-
tion number, the tool name and the replacement tool number.
The most common tools and probes for turning, drilling and milling are
reachable over the tool list.
Geometrical and technological tool data can be assigned to each tool type.
Depending on the tool type different correction data are necessary.
840D/828D SINUMERIK Operate
Section 3
Notes