Siemens Sinumerik 840D Operating Turning page 444

Hide thumbs Also See for Sinumerik 840D:

Complex programming example

Insert a tool into the program.

Press the VSK 1.1 "Select tool".

The tool list window opens.

Select the tool "ROUGHIN_TOOL_A80" by using the

blue cursor key on the keyboard.

Press the VSK 1.1 "To program".

The following program line is inserted into the pro-

N130 T="ROUGHING_TOOL_A80"

Program the following G code commands.

N150 S260 M4 F0.3

Program now the call up of the contour "CYCLE62".

The contour itself is programmed at the end of the

program (see section 31).

For this, press the HSK 1.4 "Cont. turn." to open the

technology "Contour turning".

Press now the VSK 1 "Contour".

The vertical softkey bar with functions for creating or

calling up a contour opens.

Press the VSK 2 "Contour call" to open the input

mask for the contour call up.

Insert the following contour name into the parameter

Confirm your input by pressing the VSK 8 "Accept".

The following line is inserted into the program:

N160 CYCLE62("SPIGOT_BLANK",1,,)

The contour "SPIGOT_BLANK" you called up here,

will be created in section 31.

Program now the next contour call "CYCLE62".

Press now the VSK 1 "Contour".

The vertical softkey bar with function for creating or

calling up a contour opens.

840D/828D SINUMERIK Operate

Sinumerik 828d