Siemens Sinumerik 840D Operating Turning page 615

Hide thumbs Also See for Sinumerik 840D:

Simple programming example

Finish now the contour description by pressing the

VSK 8 "Accept".

The following program block "Contour" will be in-

serted into the work plan:

The program chain starts (recognizable from the

bracket opened downward, on the right side of the

programming symbol) .

Insert a stock removal cycle into the program.

Press the HSK 1.4 "Cont. turn." to open the function

"Contour turning".

Press the VSK 1.2 "Stock removal" to open the pa-

rameter window for the stock removal cycle.

The parameter mask for the stock removal cycle

opens (see next page).

840D/828D SINUMERIK Operate

Sinumerik 828d