Siemens Sinumerik 840D Operating Turning page 392

Hide thumbs Also See for Sinumerik 840D:

The blank is needed for the simulation and the simultaneous recording dur-

ing machining.

Only with a blank, which corresponds to the real workpiece as exactly as

possible, a meaningful simulation is possible.

For defining the blank, the form (block centered, pipe, cylinder, n corner)

and the dimensions are needed.

5.3.1 Selecting the function "Blank"

By pressing the VSK 1.1 "Blank" the blank input win-

Parameters for the "Blank"

The following blank forms can be selected:

Initial dimension

ZI (abs/inc)

Final dimension related to ZA (absolute or incre-

ZB (abs/inc)

Machining dimension

Main spindle

Counterspindle

Block centered

840D/828D SINUMERIK Operate

Sinumerik 828d