Siemens Sinumerik 840D Operating Turning page 289

Hide thumbs Also See for Sinumerik 840D:

3.10.3 Loading a tool

Either press the "OFFSET"-key on the keyboard or

press "MENU SELECT" on the operator panel, then

the HSK 2 "Parameter" and the HSK 1 "Tool list" to

switch to the tool list.

In the tool list press the VSK 1.5 "Load".

The "Load on ..." window opens.

The field "... loc." is reallocated with the first empty

place in the magazine.

Press the VSK 8 "OK" to accept the suggested loca-

tion number.

Insert another location number and press the VSK 8

Several magazines

If you have configured several magazines, the "Load on ..." window ap-

pears after pressing the VSK 1.5 "Load".

If you do not want to use the suggested empty location, then enter your

desired magazine and magazine location. Confirm your selection with the

Several loading points

If you have configured several loading points for a magazine, then the

"Select loading point" window appears after pressing the VSK 1.5 "Load".

Select the required loading point and confirm with the VSK 8 "OK".

840D/828D SINUMERIK Operate

Sinumerik 828d