Siemens Sinumerik 840D Operating Turning page 245

Hide thumbs Also See for Sinumerik 840D:

Operating mode "AUTO"

Display area

Description (continuation)

By pressing the "Extend"-button you can switch be-

tween the normal and the extended horizontal soft-

This symbol on the right of the dialogue line indi-

cates that more softkeys are available on the ex-

tended horizontal softkey bar.

This symbol indicates that the extended horizontal-

softkey bar is shown at the bottom of the screen.

You can switch back to the HSK 1 again by press-

ing the "Extend"-key.

By pressing the HSK 2.6 "Handwheel" the input

mask for assigning axes to all parameterized hand-

wheels is displayed.

By pressing the HSK 2.8 "Settings" a window opens

up where you can adjust the settings for manual

operation on the Sinumerik Operate.

840D/828D SINUMERIK Operate

Sinumerik 828d