Siemens Sinumerik 840D Operating Turning page 223

Hide thumbs Also See for Sinumerik 840D:

Parameters for "Settings"

In the "Settings for manual mode" window all configurations for manual

operation can be done.

Type of feed:

Setup feedrate G94 mm/

Setup feedrate G95 mm/rev Feedrate in mm/rev

Variable increment

Spindle speed

After inserting the values in the input fields, press the VSK 8 "Back" to

switch back to the main screen of the Sinumerik Operate in the extended

840D/828D SINUMERIK Operate

Axis feedrate/linear feedrate

Revolutional feedrate

Feedrate in mm/min

Enter the desired increment for axis traversal

by variable increments

Spindle speed in rpm

Sinumerik 828d