Siemens Sinumerik 840D Operating Turning page 540

Hide thumbs Also See for Sinumerik 840D:

5.5.3 Work offset

You can call work offsets (G54, etc.) from any program.

You can use these offsets, for example, when you want to machine

workpieces with various blank dimensions using the same program.

The offset will, in this case, adapt the workpiece zero to the new blank.

5.5.3.1 Selecting the function "Work offset"

By pressing the VSK 1 "Work offset" the work offset

window opens.

5.5.3.2 Parameters for the "Work offset"

Basic reference

840D/828D SINUMERIK Operate

Sinumerik 828d