Siemens Sinumerik 840D Operating Turning page 458

Hide thumbs Also See for Sinumerik 840D:

Complex programming example

Examine now the outline of the contour.

Press the blue "cursor-to-the-left" key on the key-

board, to switch with the orange selection cursor to

the yellow contour step bar on the left side of the

Use the blue "cursor-down" key on the keyboard to

place the orange selection cursor on the END-

The following screen with the a sketch of the finished

contour outline is displayed.

Finish the creation of the contour by pressing the

VSK 8 "Accept"

The following program code is inserted into the pro-

N360 E_LAB_A_SPIGOT_FINISHED: ;#SM Z:6

G18 G90 DIAMOF;*GP*

G0 Z0 X0 ;*GP*

G1 X24 CHR=3 ;*GP*

Z-18.477 RND=4 ;*GP*

G2 Z-55.712 X30 K=AC(-35) I=AC(40)RND=4 ;*GP*

G1 Z-75 RND=6 ;*GP*

Z-80 X45 RND=4 ;*GP*

;E_LAB_E_SPIGOT_FINISHED:

840D/828D SINUMERIK Operate

Sinumerik 828d