Siemens Sinumerik 840D Operating Turning page 449

Hide thumbs Also See for Sinumerik 840D:

Complex programming example

Press the VSK 1 "Contour".

The vertical softkey bar with functions for creating

and calling up a contour opens.

Press the VSK 2 "Contour call" to open the input

window for the call up of a contour.

Enter the following name into the input mask:

Confirm your input by pressing the VSK 8 "Accept".

The following line is inserted into the program:

N310 CYCLE62("SPIGOT_FINISHED",1,,)

The contour you called up here, will be created at

the end of the program in section 52.

As a last machining step program a stock removal

cycle "CYCLE952".

Press the VSK 2 "Stock removal" to open the pa-

rameter mask for the "Stock removal cycle".

Insert the following values into the parameter mask:

Confirm your inputs by pressing the VSK 8 "Accept".

840D/828D SINUMERIK Operate

Sinumerik 828d