Siemens Sinumerik 840D Operating Turning page 300

Hide thumbs Also See for Sinumerik 840D:

Magazine management

5.5 Relocate

Tools can be directly relocated within magazines to another magazine lo-

cation, which means that you do not have to unload tools from the maga-

zine in order to load them into a different location.

When you are relocating a tool, the application automatically suggests an

empty location.

You may also directly specify an empty magazine location.

5.5.1 Selecting the function "Relocate"

By pressing the VSK 5 "Relocate" the "...move from

location...to..." window opens.

5.5.2 Relocating a tool

Press the "MENU SELECT"-key on the operator

panel, then the HSK 2 "Parameter" to open the oper-

ating area "Parameter". Alternatively press the

"OFFSET"-key on the keyboard.

Press the HSK 4 "Magazine".

The magazine window opens.

Position the cursor on the tool that you wish to relo-

cate to a different magazine location.

Press the VSK 5 "Relocate".

The "...move from location...to..." window opens.

The "... loc." field is initialized with the number of the

first empty magazine location.

Press the VSK 8 "OK" to relocate the tool to the sug-

gested location.

840D/828D SINUMERIK Operate

Sinumerik 828d