Siemens Sinumerik 840D Operating Turning page 424

Hide thumbs Also See for Sinumerik 840D:

Simple programming example

2.2 Programming example: Multi-edged spigot

The following program with a call-up up of a milling cycle is to be pro-

Program the first two G code commands:

N100 G54 G17 G90

N110 TRANSMIT

Insert now blank for the simulation into the program.

Press the HSK 1.6 "Various" to open the work area

Press the VSK 1 "Blank" to open the parameter

mask for the blank input.

Insert the following values for the blank into the pa-

rameter mask.

Confirm your inputs with pressing the VSK 8

The following line is inserted into the program:

N120 WORKPIECE(,,"","CYLINDER",192,0,-100,-

840D/828D SINUMERIK Operate

Sinumerik 828d