Siemens Sinumerik 840D Operating Turning page 662

Section 3
Notes
B649
B649
Complex programming example
2. Insert the following values for the program header
into the parameter mask and confirm your inputs by
pressing the VSK 8 "Accept":
The following program block is inserted into the work
plan:
3. Insert a probe tool (3D_PROBE) into the program.
Note:
In order to do this, you have to access the tool list
window from the work area "Straight Circle"!
This is necessary, since the tool list is not directly
accessible over the technology "Measurement Turn-
ing".
Press the "Extend"-key on the operator panel to
switch to the vertical softkey bar 2.
The vertical softkey bar 2 opens.
Press the HSK 2.2 "Strght Circle", to open the oper-
ating area "Straight Circle". Here you have access to
the function "Tool".
Press the VSK 1 "Tool", to open the parameter win-
dow for the tool.
Press the VSK 1 "Select tool".
The tool list window opens.
Page 10 840D/828D SINUMERIK Operate