Siemens Sinumerik 840D Operating Turning page 476

Hide thumbs Also See for Sinumerik 840D:

Complex programming example

Program the following G code line:

N430 G0 X200 Z200

Insert a new tool (PLUNGECUTTER_3) into the

Press the VSK 1.1 "Select tool".

The tool list window opens.

Mark the desired tool (PLUNGECUTTER_3) in the

tool list window with the orange selection cursor.

Press the VSK 1.1 "To program".

The following program line is inserted into the pro-

N490 T="PLUNGECUTTER_3"

Program the following G code commands:

N450 G96 S200 M4

N460 G95 F0.1

As a last machining step, insert a "Cutoff" cycle into

the program.

Press the VSK 5 "Cutoff".

The input window for the "Cutoff" cycle opens..

Insert the values into the parameter mask like dis-

played below:

Confirm your inputs by pressing the VSK 8 "Accept".

The following g code line is inserted into the pro-

N470 CYCLE92(100,-80,0,-2,0,1,150,1500,

3,0.1,0.05,200,0.2,0,,2,11000)

840D/828D SINUMERIK Operate

Sinumerik 828d