Siemens Sinumerik 840D Operating Turning page 180

Section 2
Notes
B518
B518
Basic operations
8
Position display for the axes
MCP/Display area
9
Display of the active zero point, rotation, mirroring and scaling
Display area
10
Work window
Depending on the pressed horizontal softkey the associated parameter
fields and help pictures are displayed. Here the "T,S,M"-mask is shown.
Page 8
Description
Switching between the machine co-
ordinate system and the tool co-ordinate
system is possible either by means of the
vertical softkey or the MCP.
Display of the available axes wit axis de-
nomination and position data in the ma-
chine coordinate system (Mach).The
slider on the right hand side indicates
some hidden values like the angle position
of the spindle (SP).
Display of the available axes with axis de-
nomination and position data in the work
piece coordinate system (WCS), how-
ever, without programmable work offsets
and system frames for cycles (ENS).
Description
Name of the currently active work offset,
rotation, mirroring, rotation and scaling for
the present machining sequence.
840D/828D SINUMERIK Operate