Siemens Sinumerik 840D Operating Turning page 229

Operating mode "MDA"
2.3 Horizontal softkey bar 1 and 2
Display area Description
By pressing the HSK 1.1 "Load MDI" the "Load into
MDI" program manager window opens.
By pressing the HSK 1.2 "Save MDI" the "Save
from MDI : Select storage location" program man-
ager window opens.
By pressing the HSK 1.4 "Prog. cntrl." the "Program
control" subwindow opens on the screen.
By pressing the "Extend"-button on the operator
panel (OP) more softkeys on the HSK will be avail-
able.
This symbol on the right of the dialogue line indi-
cates that more options on the HSK are available.
Press the "Extend"-button on the OP to open the
extended HSK.
This symbol indicates that you are in the extended
softkey bar.
Press the "Extend"-button on the OP to switch back
to the main HSK.
By pressing the HSK 2.6 "Handwheel" the input
mask for traversing the axis in machine coordinate
system (MCS) or tool coordinate system (TCS) will
be available.
840D/828D SINUMERIK Operate
Section 2
Notes