Siemens Sinumerik 840D Operating Turning page 684

Section 3
Notes
B657
B657
Complex programming example
Enter the following position values and press the
VSK 5 "Rapid traverse" to change the selection
feedrate to rapid traverse rate.
Acknowledge the inputs with the VSK 8 "Accept".
The following program block is added to the work
schedule.
11. Now programme a further rapid traverse motion.
Press the HSK 2.2 "Strght Circle" to gain access to
the function "Straight".
Press the VSK 2 "Straight".
The input mask for the technology "Straight" opens:
Enter the following position values and press the
VSK 5 "Rapid traverse" to change the selection
feedrate to rapid traverse rate.
Acknowledge the inputs with the VSK 8 "Accept".
The following program block is added to the work
schedule.
12. Now programme a further rapid traverse motion.
Press the HSK 2.2 "Strght Circle" to gain access to
the function "Straight".
Press the VSK 2 "Straight".
The input mask for the technology "Straight" opens:
Page 16 840D/828D SINUMERIK Operate